Integra Integra Research RDC-7.1, Инструкция по эксплуатации

Страница: 12 / 156

12
Index Parts and Facilities —Continued
Caution:
The front door of the AV Controller is motorized. Use the [Open/Close] button to open or close the door. Manually
opening or closing the door, or moving the AV Controller while holding the door, will cause the door to malfunc-
tion or break.
A
Zone 2 button [70]
Press this button to enter the Zone 2 configuration
mode. If you want to configure the Zone 2 settings
such as standby/on setting, input source setting,
listening mode, volume adjustment, audio selector
mode, and display settings, press this button first.
B
Rec/Zone 3 button [70, 72]
Press the [Rec/Zone 3] button to output to a
recording component for recording purposes or
enter the Zone 3 mode. After pressing the [Rec/
Zone 3] button, press one of the input source
selector buttons within 3 seconds to select the
component. When one is selected, the indicator
above that button will light in red. To record from
the same input source that you are using (that is
selected for the main zone), press the [Rec/Zone 3]
button twice in succession.
Note:
Recording and Zone 3 operations use the same
circuit and therefore cannot be used at the same
time.
Inner Panel
Phones Clear
Rec/ Zone 3 Zone 2 Off DSP Display Tuning Tuning Mode Preset Memory Setup Exit Enter RT/PTY/TP
AV Controller
RDC-7.1
USA, Canadian, and Australian models
European models
Phones Clear
Rec/ Zone 3 Zone 2 Off DSP Display Dimmer Tuning Tuning Mode Preset Memory Setup Exit Enter
AV Controller
RDC-7.1