8
I/O & Capture
Condenser Microphone:
The
Condenser Microphone
located on the
front panel can be used for capturing audio. It is normalled to the
Onset
Input
when no cables are patched to the
Onset Input
jack.
•
The
Onset Input
is normalled to the
Input
. When no cables are
connected to either input, the
Condenser Microphone
will normal
through the
Onset Input
and to the
Input
.
Input:
AC coupled audio input.
Normalised Signal Path:
Input Level:
The
Input Level
knob sets the level of the signal present at
the
Input
. This includes the level of the normalled
Condenser
Microphone
signal. The input stage incorporates analogue limiting. This
allows
arbhar
to saturate rather than digitally clip when high amplitude
signals are used.
•
If the knob is at its 10:00 position, the signal present at the
Input
is
approximately at unity gain. If the knob exceeds the 10:00 position,
arbhar
drives the signal through the input pre-amplifier. Analogue
limiting will prevent signals from digitally clipping at the
Input
.
•
The knob can be used to increase line level signals to modular level.
Input Indicator:
The
Input Indicator
will illuminate amber when a signal
is present at the
Input
. The brightness of the LED indicates the amplitude
of the input signal.
Microphone ONSET
IN
Signal to be Analysed
Signal to be Recorded
