47
Delay Mode Dry/Wet Mix:
Summary: arbhar
is set to it’s
Feedback/Delay Hardware
Configuration
(See the
Hardware Configurations
section for more
information).
When both
Output 1
and
Output 2
are connected,
Output
1
generates the dry signal only and
Output 2
generates the wet signal
only. Patching the outputs to two attenuators allows for level control
over the dry/wet mix separately. The dry and wet outputs are summed
together and monitored. Sending CV to the
MOD CV Input
controls
arbhar
’s curated
Feedback/Delay
parameter.
Audio Path:
•
Connect any audio signal to the
Input
.
•
Set the
Input Level
to a desired position and set the
Output Level
fully clockwise.
•
Set the
Dry/Wet Mix
knob to a desired position. If the
Dry/Wet
Mix
knob is fully clockwise (fully wet), then audio will not be heard
until audio has been captured.
•
Connect
Output 1
to the input of a VCA for attenuated level control
of the dry signal. Set to a desired amount.
Audio Signal
Output
Link
