9
Dry/Wet Mix:
The
Dry/Wet Mix
parameter will equal power
crossfade between the dry signal and the granular engine.
Output Level:
The
Output Level
knob sets the level of the signal present
at the
Outputs
.
Outputs:
By default, grains are randomly distributed between the two
Outputs
using coin toss logic.
•
Output 2
is normalised to
Output 1
. For mono playback, monitor
from
Output 1
•
Connecting
Output 2
enables stereo imaging and independent
effect processing for each output (See
for
more information).
Capture Button:
The
Capture Button
activates recording of the signal
present at the
Input
.
•
Each capture activation will start recording from the start of
the layer.
•
Once the recording has started, the button will illuminate amber and
recording will continue until the layer is filled, even if the currently
selected layer is being changed.
•
The recording will automatically stop once the layer is filled. This is
indicated by an unilluminated
Capture Button
.
•
Pressing the
Capture Button
while capture is activated will
stop recording.
•
arbhar
automatically saves recordings and will retain recordings
between power cycles (See the
Save & Load
section for
more information).
Capture Gate Input:
Recording and overdubbing is activated for as
long as a gate signal at the
Capture Gate Input
is held high.
