40
•
Set the
Dry/Wet Mix
knob to fully clockwise. Audio will not be
heard until audio has been captured.
•
Monitor
Output 1
for mono playback. Monitor
Output 1
and
Output 2
panned hard left and hard right for stereo playback.
•
Set the
Layer
knob to the desired capture location.
•
Press the
Capture Button
or connect a gate signal to the
Capture
Gate Input
to start capturing audio.
•
Capture will be activated until the maximum layer duration has been
met, if the
Capture Button
is pressed while capture is activated, or if
the gate signal present at the
Capture Gate Input
is low.
•
Once capture has deactivated, turn the
Input Level
fully
anticlockwise. This effectively turns down the
Condenser
Microphone
input signal.
•
Set all granular and pitch knobs to desired positions.
Audio Path:
•
Apply control voltage to any of the CV inputs of
arbhar
.
