23
•
Turning the knob clockwise increases the responsiveness of the
Onset Input
.
•
Turning the knob anticlockwise decreases the responsiveness of the
Onset Input
.
Hold:
The
Hold
parameter changes functionality based on the selected
Onset Control Mode
.
•
If capture is triggered by onset detection, the
Hold
parameter sets
the minimum capture time when capture is activated.
•
If gate signals are generated at the
Gate Output
upon onset
detection, the
Hold
parameter sets minimum time between
gate signals.
•
See the
Onset Control Modes
section for more information.
Dub:
The
Dub
parameter is used for audio replacement and sound-on-
sound recording. It sets the level of the existing audio within the layer
and the audio of the new capture.
•
If the knob is fully anticlockwise, the new capture will replace the
current capture in the currently selected layer.
•
If the knob is in the centre position, the existing capture at half
amplitude is mixed with the new capture at half amplitude.
•
If the knob is fully clockwise, the existing capture at full amplitude
is mixed with new capture at full amplitude. This setting is great for
accumulating audio layers.
New audio capture
destructively replaces
previous audio.
Previous audio will be
attenuated by 50% and
summed with new audio.
New audio will sum
with previous audio
at full amplitude.
