Instruo arbhar Скачать руководство пользователя страница 33

Страница: 33 / 50

Import & Export

Import:

Files can be imported into a layer from the USB flash drive.

•

Insert a USB flash drive into the computer.

•

Drag and drop the desired file to the

_toConvert

folder of the USB

flash drive.

•

Ensure that there are no spaces within the file names - ‘my sample.
wav’ should be ‘mySample.wav’ or ‘my_sample.wav’.

•

The first 13 seconds of the first six files in alphabetical order will be
converted into the optimal format for

arbhar

. These converted files

will appear in the

_userfiles

folder on the USB drive.

•

Once the files have loaded, eject the USB flash drive from
the computer.

•

With

arbhar

powered off, insert a USB flash drive into the USB port

on the back of

arbhar

•

Once the USB flash drive has been inserted, power

arbhar

on.

•

Once

arbhar

has fully booted, press and hold the

Shift Button

and

then press the

Strike Button

for at least (>=) 2 seconds.

Export:

Files can be exported from a layer to the USB flash drive.

•

With

arbhar

powered off, insert a USB flash drive into the USB port

on the back of

arbhar

•

Once the USB flash drive has been inserted power

arbhar

on.

•

Capture audio into a layer.

•

Press and hold the

Shift Button

and the

Capture Button

and then

press the

Strike Button

for at least (>=) 2 seconds.

•

The layer will export to the

_usersaved

folder of the USB flash drive.

as a 48kHz / 24 Bit .wav file. Files saved to the USB flash drive are
not available to load back into

arbhar

, unless they are moved into

the

_toConvert

_userfiles

folders of the USB

flash drive.

•

If the

Export

feature is used while the omega layer is selected, all

layers will export simultaneously.

•

It is important to note that

Importing

and

Exporting

is only possible

on a per layer basis.

Содержание arbhar



















































Результаты поиска

Содержание arbhar

Отзывы:

Похожие инструкции для arbhar

Бренды по названию

Популярные бренды

Instruo arbhar, Руководство пользователя

Результаты поиска

Содержание arbhar

Отзывы:

Похожие инструкции для arbhar

Бренды по названию

Популярные бренды