45
Looping Granular:
Summary:
A scaled and offset sawtooth waveform is used to modulate
the
Scan
position of
arbhar
for looping granular playback. Scaling sets
the length, inversion sets the direction and the LFO frequency sets
playback speed.
Audio Path:
•
Connect any audio signal to the
Input
.
•
Set the
Input Level
to a desired position and set the
Output Level
fully clockwise.
•
Set the
Dry/Wet Mix
knob to a desired position. If the
Dry/Wet
Mix
knob is fully clockwise (fully wet), then audio will not be heard
until audio has been captured.
•
Monitor
Output 1
for mono playback. Monitor
Output 1
and
Output 2
panned hard left and hard right for stereo playback.
•
Set the
Layer
knob to the desired target layer.
•
Press the
Capture Button
or connect a gate signal to the
Capture
Gate Input
to start capturing audio.
Output 1
Output 2*
Audio Signal
LFO
(sawtooth)
