29
•
At 0V,
arbhar
distributes the grains in the default coin
toss method.
•
With positive voltage, additional to the coin toss method, the stereo
spread is reduced. At +5V, stereo spread reduces to a fully
mono mix.
•
With negative voltage, additional to the coin toss method, a random
deviation from the left and right extremes creates a more active equal
power stereo distribution. At -5V, the grains have a fully random
equal power stereo distribution.
Hold CV Configuration:
Hardware Configuration Switch
Position: B-X.
Two granular engines (24 20 grains) and
Wavetable Mode
.
The
MOD CV Input
on the
CV Expansion Module
modulates the
Hold
time
•
Positive voltage increases the set
Hold
time.
•
Negative voltage decreases the set
Hold
time.
Stereo Reverb Configuration:
Hardware Configuration Switch
Position: B-Y.
Two granular engines (20 20 grains) and
Wavetable Mode
.
The
MOD CV Input
on the
CV Expansion Module
controls curated
parameters of the stereo reverb.
•
Positive voltage controls reverb parameters mixed with the dry signal.
The reverb freezes at +5V.
•
Negative voltage omits the dry signal and only allows the wet signal
to pass. The reverb has additional shimmering modulation.
Note:
When
arbhar
is set to the
Stereo Reverb Configuration
, the
module will run at a reduced sample rate and bit depth of
48kHz / 32 Bit.
