Innovaphone IP6000 страница 92 Скачать руководство пользователя

Страница: 92 / 155

page 92

innovaphone IP DECT

activate the new version. The

immediate reset

and

reset when idle

links are

provided for this purpose. More detailed information on resetting the device is
contained in the chapter entitled “

Administration/Reset

”.

Take a look in the documents supplied with the new versions to find out whether
new protocol firmware also needs to be loaded.

4.2.5 Administration/Diagnostics

The

Diagnostics

menu can be used to monitor the operating state of the device.

4.2.5.1 Administration/Diagnostics/Logging

Using the

Syslog

link, the log messages of the device can be viewed directly in

active operation. The messages are continuously automatically updated and are
scrolled upwards, out of the window.
Only messages that were enabled in the

Logging

submenu are displayed. The

following settings can be enabled

TCP

All TCP connections.

PPP

All PPP connections.

Relay Calls

All calls that go via the Relay – only visible for devices with S

or S

m interface.

Relay
Routing

All calls that must be routed via the Relay – only visible for
devices with S

and S

m interface.

DECT
master

All DECT master connections – only visible for IP DECT
systems.

DECT
radio

All DECT radio connections – only visible for IP DECT
systems.

H.323
Registrati-
ons

All H.323 registrations.

SIP Regi-
strations

All SIP registrations.

Config
Changes

All configuration changes.

TEL1-n

All TEL1-n connections – only visible for devices with TEL
interface.

Содержание IP6000




























































































































































Результаты поиска

Содержание IP6000

Отзывы:

Похожие инструкции для IP6000

Бренды по названию

Популярные бренды

Innovaphone IP6000, Руководство администратора

Результаты поиска

Содержание IP6000

Отзывы:

Похожие инструкции для IP6000

Бренды по названию

Популярные бренды