Innovaphone IP6000 страница 81 Скачать руководство пользователя

Страница: 81 / 155

innovaphone IP DECT

Page 81

4.2.2.3.1

Interface (VoIP Interfaces)

Clicking the relevant VoIP interface (

GW1-12 <Name of the VoIP interface>

) in

the

Interface

column opens a popup page, on which the VoIP interfaces can be

individually configured. Like the PBX objects, this popup page also contains stan-
dard entry fields that occur, more or less, in all VoIP interfaces.
These standard fields are:

CGPN In, CDPN
In, CGPN Out,
CDPN Out

Precise details on CGPN In, CDPN In, CGPN Out and
CDPN Out mappings are contained in the chapter entitled
“

Administration/Gateway/Interfaces/CGPN-CDPN Map-

pings

” further up in the text.

Registration

If a terminal has successfully registered with a gateway,
then this is indicated in this column through specification
of the IP address

<Name of the VoIP interface:Call num-

ber:IP address>

Name

The descriptive name of the VoIP interface.

Disable

A checked check box disables the relevant VoIP interface.

Protocol

The protocol to be used, that is,

H.323

SIP

. Depending

on which protocol is used, the set-up of the entry fields
changes.

Mode

Describes the mode of registration. Possible registration
modes are:
1. Gateway without Registration - Logs the VoIP interface

(gateway) on to the configured gatekeeper without a
registration.

2. Register as Endpoint - Registers a VoIP terminal with

the configured gatekeeper.

3. Register as Gateway - Registers a VoIP gateway with

the configured gatekeeper.

4. Gatekeeper/Registrar - Is required for managing all

gatekeeper registrations on a gateway.

5. ENUM - Is used to register an ENUM connection with

the relevant interface.

Gatekeeper
Address (pri-
mary)

The primary Gatekeeper IP address at which the terminal
or gateway is to register via the relevant interface. Only
necessary for modes 2 and 3

Содержание IP6000




























































































































































Результаты поиска

Содержание IP6000

Отзывы:

Похожие инструкции для IP6000

Бренды по названию

Популярные бренды

Innovaphone IP6000, Руководство администратора

Результаты поиска

Содержание IP6000

Отзывы:

Похожие инструкции для IP6000

Бренды по названию

Популярные бренды