Safety instructions
The manufacturer assumes no responsibility for any personal injury, damage to
property or subsequent damage that can be attributed to improper use of the
device.
Power supply
The mains adapter of the device is designed for operation with a 100-240V, 50Hz
AC network. Some devices can also be operated using
PoE
(
P
ower
o
ver
E
thernet) in accordance with IEEE 802.3af. No attempt should ever be made to
connect the equipment to other mains systems! In the event of power failure, the
equipment settings are retained.
Installation and connection
The connection cables should be laid safely so that no one can trip over them.
Connected cables must not be bent excessively or subjected to mechanical strain.
The equipment is intended for use in dry rooms only.
• Operating temperature: 0° C to 40° C, 10% to 90% relative humidity, non-
condensing.
• Storage temperature: -10° C to 70° C
The equipment must not be installed and operated under the following conditions:
• In damp, dusty, vibrating rooms or in rooms where an explosion may occur.
• At temperatures over 40°C or under 0°C
Malfunctions
There is no need to open the device, if it is used as intended and serviced as
specified. But if the device is opened for some reason, it must be ensured that all
connection cables have been first removed. Before opening the device, interrupt
the power supply by removing the power/Ethernet cable.
Do not open or reconnect faulty equipment. The original packing should be kept
safely in case the device needs to be returned, since it provides ideal protection.
All entries (for example, on a PC) should be backed up beforehand to avoid losing
data.
Disposal
When due for disposal, the device must be returned directly to the manufacturer
innovaphone AG in accordance with the WEEE guidelines (
W
aste
E
lectrical and
E
lectronic
E
quipment). The costs for returning the device shall be borne by
innovaphone AG.
