innovaphone IP DECT
Page 89
4.2.2.6 Administration/Gateway/Calls
In the
Calls
gateway overview page, all calls actively being made can be moni-
tored. This is advantageous for diagnostic purposes in particular, since the exi-
stence of possible network problems, for example, is immediately visible (see
Coder
):
HTTP
The CDR entries are transferred to a Web server, where they
can be further processed. Each individual CDR entry is transfer-
red as form data to the Web server in HTTP GET format.
•
In the
Address
field, you enter the IP address of the Web
server that carries out further processing of the transmit-
ted data.
•
In the
Path
field, you enter the relative URL of the form
program on the Web server.
The device will make a HTTP GET request to the Web ser-
ver on the entered URL, followed by the URL-encoded CDR
entry. If, for example, a page named
/cdr/cdr-
write.asp
with a form that expects the log message in
parameter
msg
exists on a Web server, then the value
/
cdr/cdrwrite.asp
is entered. The device will then
make a
GET
/cdr/cdrwrite.asp?event=sys-
log&msg=
logmsg
request to the Web server.
Interfaces
Display of the calling interface.
Protocol
Display of the protocol used on the calling side.
Coders
Display of the coder used on the calling side, for example,
G711AB(2,0,0).
The values in
brackets have the following
meaning, in order:
Round trip = Transit time of a data packet from A to B and
back again.
Jitter = Latency time (time interval from the end of an event
up to the start of the response).
Loss = Number of lost packets (packet loss).
Number
Display of the called number.
State
Possible states:
Alerting, Calling, Connected, Disconnecting
.