manualshive.com logo in svg

Innovaphone IP6000, Руководство администратора

Поделиться
Скачать
Innovaphone IP6000 Скачать руководство пользователя страница 59

innovaphone IP DECT

Page 59

Every call received by the boss that was previously received by the secretaries is 
likewise signalled as a diverted call. It is thus possible to adjust the boss’s ring 
tone, so that it rings differently if the call was initialised by one of the secretaries. 
If a call is received directly on the boss’s phone, that is, not via the secretaries, 
it can be signalled with a different ring tone.
The following specifications are made in the

 EXECUTIVE

 section:

If no secretary groups have yet been created for this object, the 

Primary

,

 Se-

condary

 and

 Direct Call

 entry fields are empty.

4.2.1.4.7

Gateway Object

The

Gateway

 PBX object is used to register a gateway with the PBX. The 

Gateway

PBX object thus provides the direct dialling capability with or without prefix.

4.2.1.4.8

MCast Announcement Object:

The 

MCast Announce

 PBX object allows a call to be put through directly on se-

veral telephones. For this, a group must be defined for the MCast Announce ob-
ject, and all subscribers belonging to this group are addressed.
The following specifications are made in the

 

Multicast 

section:

Primary

The

 Primary

 secretary group, when added, may be selected 

here.

Secondary

The

 Secondary

 secretary group, when added, may be selec-

ted here.

Direct Call

The

 Direct Call

 secretary group, when added, may be selec-

ted here.

Call Exe-
cutive

Calls to the secretary’s phone are also signalled on the boss’s 
phone, if this check box is checked.

Enblock 
Count

Time (in seconds), after which the call set-up begins. 

Prefix

A prefix can be added.

Multicast 
Address

A multicast IP address must be specified. For IPv4, the multi-
cast address range 

224.0.0.0

 to 

239.255.255.255 

 

applies.

Содержание IP6000




























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды