page 68
innovaphone IP DECT
4.2.2.1 Administration/Gateway/General
General gateway settings can be made here:
The
Feature Codes
section is enabled as soon as the
Supplementary Services
(with Feature Codes)
check box is explicitly checked for an interface (see chapter
entitled “
Administration/Gateway/Interfaces
”) or the
Enable
check box is chek-
ked for an IP DECT device (see chapter entitled “
Configuration/DECT/Features
”).
Using
Feature Codes
, further features are made available to the VoIP telepho-
nes. The codes for these features can be configured. Here, it is to be noted:
• that the “
$
” character stands for a variable number of characters (for
example, a telephone number) and
Gatekeeper ID
The unique gatekeeper name. If several gatekeepers are
used in a network, then different gatekeeper IDs must be
allocated. This gatekeeper ID is the ID for VoIP inter-
faces (see also the chapter entitled „
Administration/Gate-
way/VoIP“
).
This field is displayed only in connection with a gatekee-
per licence.
Automatic CGPN
Mapping
A checked check box enables automatic call number
handling. The modification to the calling number is pro-
duced by analysing the routing table. Here a route is
searched for, that would enable callback to the current
call. There is the option of excluding individual routes
from the automatic correction of all calling numbers (see
Exclude from Auto CGPN
check box in the
Settings
sec-
tion of chapter “
Administration/Gateway/Routes
”).
Call Logging
A checked check box enables the output of syslog infor-
mation in respect of the calls made via the gateway.
Route Logging
A checked check box enables the output of syslog infor-
mation in respect of the used voice routes of the gate-
way.
Billing CDRs
only
If, in chapter “
Administration/Gateway/CDR0-1
”, a
method was specified for transmitting so-called
C
all
D
etail
R
ecords (CDR), only call information that is rele-
vant for billing is transmitted, if this check box is chek-
ked.
