manualshive.com logo in svg

Innovaphone IP6000, Руководство администратора

Поделиться
Скачать
Innovaphone IP6000 Скачать руководство пользователя страница 98

page 98

innovaphone IP DECT

7

Ready

Three color LED that indicates the status of the 
device.
LED off means, waiting for action (for example reset).
Green LED means the device is ready for operation.
Green fast blinking LED means config clear or firm-
ware/bootcode update.
Orange LED means the device is in TFTP-Mode
Red LED means the device has an error or is reboo-
ting.
Red fast blinking LED means firmware/bootcode 
upload.
See also description to „

Reset

“ in Table 1 „

Indicators 

and connectors of the IP6000

“.

8

Compact 
Flash

Slot for inserting a compact-flash memory card.

9

Reset

In addition to reset the device by the webbrowser, 
there are three (four) more ways given by the reset 
button, to reset the device.

Short Reset:

 A short reset is restarting the device. 

Doing this will disrupt all active calls.

Middle Reset (TFTP-Reset):

  The device is moving 

into TFTP-Mode, if holding the reset button until the 
Ready LED is blinking one-two times and then loose 
holding of the reset button.
All ISDN-LEDs will be deleted and the Ready LED will 
be displayed in orange.

Long Reset (Factory-Reset):

 

Holding the reset button a longer time the Ready LED 
will blink 4-6 times and change to red. If loosing the 
hold on the reset button now, the deletion of the con-
figuration is beginning. The Ready LED will be dis-
played 5 seconds in red and after that it will start to 
blink very fast in red-green and delete the display of 
all ISDN-LEDs. The device will go into TFTP-Mode and 
the Ready-LED will be displayed in orange.

Power-Cycle:

 Means to disrupt the device from the  

power supply. Works technically and visually like the 
short reset.

Table 1

Indicators and connectors of the IP6000

Содержание IP6000




























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды