page 82
innovaphone IP DECT
In the
Authorization
section, you can store a password for the VoIP interface.
In the
Alias List
section, you specify the call name (H.323) and the call number
(E.164) of the relevant registration. For VoIP end points, you should define the
assigned direct dialling number or MSN as the E.164 address, and the name as
the H.323 name. For VoIP gateways it is sufficient to define the name.
The standard entry fields in the
Coder Preferences
section were already des-
cribed in chapter “
Administration/Gateway/Interfaces/Interface (physical and
virtual interfaces)
”.
In addition to the standard fields, several advanced settings are available in the
Gatekeeper
Address (secon-
dary)
The alternative gatekeeper IP address at which the ter-
minal or gateway is to register via the relevant interface,
if registration with the primary gatekeeper fails. Only
necessary for modes 2 and 3
.
Mask
By specifying a network mask, incoming calls can be fil-
tered. Specification of the network mask
255.255.0.0
therefore allows incoming calls on the relevant interface
for terminals from the IP address range
192.168.0.0
- 192.168.255.255 .
Gatekeeper
Identifier
It is also sufficient to specify only the gatekeeper ID.
Every gatekeeper in a network can be identified by
means of its own gatekeeper ID, so that several gatekee-
pers can be operated in a network, with each terminal
nevertheless identifying the correct gatekeeper by means
of Gatekeeper Discovery (uses the multicast address
224.0.1.41
).
Password /
Retype
The security of the registration can be raised by spe-
cifying a password (
Password
). The password must be
confirmed (
Retype
).
Name
The H.323 name.
Number
The E.164 call number.
