Imagine Panacea Lite, Руководство по эксплуатации

Страница: 62 / 205

Panacea Lite Routing Switcher Series
Installation, Configuration, and Operation Manual
43
Copyright © 2004-2007, 2008, 2010, Harris Corporation
References
The following reference was used for implementing the protocol translation:
Routing Switcher Serial Protocol Reference Operation and Reference Manual,
Edition D (May 2004), Leitch Technology, Chesapeake, Virginia
RS-232/RS-422
Jumper Orienta-
tion
Figure 4-11 shows the proper orientation for the RS-232 and RS-422 jumper. (See
Figure 4-6 on page 34 for an illustration of the pin 1 reference point location.)
Table 4-5 Pass-Through Protocol Commands
Feature Description
Direct Crosspoint Take Switches the source to the destination
on the level(s) requested
Request Crosspoint Status of an Entire
Level Returns the status of destination on the
level(s) requested
Protect / Unprotect Protects or unprotects the requested
destination on the level(s) requested
using the panel/device ID requested
Lock / Unlock Locks or unlocks the requested
destination on the level(s) requested
using the panel/device ID requested
Preset Crosspoint Presets the Take of the source to the
destination on the level(s) requested
Clear Presets Clears all presets previously entered but
not yet executed
Execute Preset Buffer Takes/executes all presets previously
entered
Request Preset Crosspoint Status Looks through all previously entered
Presets for the destination and levels
requested, and returns the status of
any preset that affects that destination
and level
Frame Size
(occurs in response to a Frame Size
Request command) Reports the highest valid destination
number and source number for a level
Frame Size Request Requests the highest valid destination
number and source number for a level