Imagine Panacea Lite, Руководство по эксплуатации

Страница: 187 / 205

Appendix B
Control Panel Installation and Operation
168
Copyright © 2004-2007, 2008, 2010, Harris Corporation
Installing Key
Cap Labels
Panacea Lite control panels are shipped without labels on the front panel key caps.
A key cap disassembly tool and a sheet of label inserts are included for your
convenience. These label inserts, or any customer artwork printed on translucent
material, can be installed in the front panel lamps.
Follow these steps to disassemble and reassemble key cap labels.
Disassembly
Figure B-4 Disassembly
1 Pull the key cap off the front of the control panel.
2 Hook the disassembly tool under the opposite corners of the key cap body.
3 Hold the clear outer lens in one hand while you use the disassembly tool to
pull the white key cap body from the outer lens.
Reassembly Two notches on the back of the lens cap assembly fit into two notches on the
inside of the switch body on the front panel board. Make sure the artwork’s top
faces one of these two notches.