Imagine Panacea Lite, Руководство по эксплуатации

Страница: 181 / 205

Appendix A
Safety Precautions, Certifications, and Compliances
162
Copyright © 2004-2007, 2008, 2010, Harris Corporation
These devices are for professional use only and comply with Part 15 of FCC rules.
Operation is subject to the following two conditions:
1 These devices may cause interference to radio and TV receivers in residential
areas.
2 These devices will accept any interference received, including interference that
may cause undesired operations.
Changes or modifications not expressly approved by Leitch Technology,™ the party
responsible for compliance to the FCC Part 15 Rule, could void the user’s authority
to operate this equipment legally in the United States.
These devices do not exceed the Class A limits for radio noise emissions from
digital apparatus as set out in the interference standard entitled “Digital
apparatus,” ICES-003 of the Canadian Department of Communications.
Additional EMC
Information
This device is for professional use in a controlled EMC environment, such as
purpose-built broadcast studios.
EMC regulations require that the radiation emitted from this unit does not exceed
certain limits. These limits are only met when the front panel is closed and the two
thumb screws are secured.
Compliance to the EMC regulations is also dependent on the use of suitably
shielded (screened) cables. Coax cables should be of the double-shielded
(screened) variety. Unused BNCs should be fitted with 75

terminations.
All audio cables should be screened with the shield (screen) making good contact
with the metallic parts of the cable connectors.
D-type connectors used with this unit should always have metallic shells with the
shield (screen) of the cable mechanically bonded to the metal shell. It is further
recommended that the D-type cable connectors be of the “dimple” variety. These
connectors make a better contact and consequently improve EMC performance.
EN61000-4-5 Surge Immunity Test 0.5 kV a.c. Power Line
EN61000-4-6 Immunity to Conducted Disturbances Induced by
Radio Frequency Fields 1 V rms 0.15-80 MHz Sig.
& Ctrl. Lines, 3 V rms 0.15-80 MHz d.c. Power
Line, 1 V rms 0.15-80 MHz a.c. Power Line, 1 V
rms 0.15-80 MHz Functional Earth
EN61000-4-11 Voltage Dips, Short Interruptions, and Voltage
Variations- Immunity Tests
Table A-1 EMC Standards (Continued)
EMC Standard Description