Imagine Panacea Lite, Руководство по эксплуатации

Страница: 194 / 205

Panacea Lite Routing Switcher Series
Installation, Configuration, and Operation Manual
175
Copyright © 2004-2007, 2008, 2010, Harris Corporation
Figure B-12 Panel Enable Key
If the Panel Enable key is lit, the panel is enabled .

The panel will operate normally.

Source Select and Destination Lock keys function as described above.

You can make changes from this particular panel.
If the Panel Enable key is not lit, the panel is disabled . It locks all the keys on the
panel so that they cannot be reset.

The panel will not allow changing crosspoints or locking/unlocking
destinations.

Pressing the Lock key will have no effect.

Pressing a Source Selection key will not cause a crosspoint switch.
Breakaway
Operation
NOTE : This procedure is the same for both local and remote control
panels.
Unlike most other control panels, the Panacea Lite control panels perform
breakaway operations. The default starting level is level 0, which is typically
assigned to Video. The next level by default is level 1, which is typically assigned to
Audio. These examples will use the reference to the first starting level as Video and
the next level as Audio. However, the DIP switches on the back panel of the
Panacea Lite frame may be configured to assign a Level.
Figure B-13 on page 176 shows how to operate the P12×1-CP or the P12×1-RCP
in one of these modes:

AFV (Audio Follow Video) switching

Breaking away Audio

Changing the source on the Video Level