Imagine Panacea Lite, Руководство по эксплуатации

Страница: 154 / 205

Panacea Lite Routing Switcher Series
Installation, Configuration, and Operation Manual
135
Copyright © 2004-2007, 2008, 2010, Harris Corporation
Figure 4-73 Definition of a BREAK Character
Exceptions to
TEN-XL SMPTE
Protocol
Due to hardware differences between Panacea Lite routers and TEN-XL routers,
there are differences in the Panacea Lite implementation.
1 Source Numbers for READ and WRITE commands: The Panacea Lite series
supports more inputs (up to 12) than the TEN-XL (up to 10 inputs) routers. To
provide access to sources beyond 10, the use of the data byte has been
expanded.
2 Since the Panacea Lite does not support power supply status reporting, the
POWER SUPPLY STATUS byte of the READ sequence [PS] will always return
0x00.
NOTE : [ADDR] is transmitted as two bytes. If [ADDR] is 0x80A0, then it
would be sent as 0x80, 0xA0, where 0x80 is [ADDRHI] and 0xA0 is
[ADDRLO].
Table 4-29 SMPTE Data Byte to Source Comparison
Data Byte
Nibble Corresponding
Source
0x01 1
0x02 2
0x03 3
0x04 4
0x05 5
0x06 6
0x07 7
0x08 8
0x09 9