Imagine Panacea Lite, Руководство по эксплуатации

Страница: 121 / 205

Chapter 4
P12×1-SP Installation, Configuration, and Operation
102
Copyright © 2004-2007, 2008, 2010, Harris Corporation
X-Y Control
of Sony
®
Control Sys-
tem :
LXYTOSONY
NOTE : This submodule can also be set up to operate in LSERIAL mode. See
page 42 for more information about LSERIAL mode.
Use the LXYTOSONY configuration to allow control of a VTR using Harris control
panels or software. In this application, the P12×1-SP translates from X-Y to Sony
1
protocol. Only one P12×1-SP is necessary, regardless of the number of VTRs to be
controlled.
Machine Control
Commands
The LXYTOSONY protocol allows the P12×1-SP to covert the X-Y command to
Sony command so that any Harris product can talk to any Sony machine. This
version is specifically for the machine control of Opus Master Control Panel to
control Sony VTR through this P12×1-SP device. The currently implemented
functions are

Stop

Play

Fast forward

Rewind

Pause

Cue

Mark

Status Update

Mark Reset

Standby Off

Standby On
The P12×1-SP accepts the machine control X-Y commands and converts them to
the appropriate Sony commands. The machine control X-Y commands and Sony
commands are in the following forms:
1
“Sony” is a registered trademark of Sony Electronics Inc., its parent, and/or its affiliates.
Table 4-20 Machine Control X-Y and Sony Commands
Command X-Y Command Sony Command
Stop K:<Device ID>,S1 20 00
Play K:<Device ID>,S2 20 01
Fast Forward K:<Device ID>,S3 20 10
Rewind K:<Device ID>,S4 20 20
Pause K:<Device ID>,S5 21 21 00
Mark K:<Device ID>,S6 Sent Request to Device for current
time, store it in the
P12×1-SP
Cue K:<Device ID>,S7 24.31.<Stored Time>