Imagine Panacea Lite, Руководство по эксплуатации

Страница: 189 / 205

Appendix B
Control Panel Installation and Operation
170
Copyright © 2004-2007, 2008, 2010, Harris Corporation
Choosing the
Appropriate
Configura-
tion Mode
Choosing which configuration mode to use will depend on which features are
desired from the control panel.
DIP switch configuration mode is ideal in situations where complex mapping of
sources and destinations is not required. Configuration is achieved by setting a
small number of DIP switches located on the rear of the Panacea Lite frame.

See Figure B-7 on page 171 for the P12×1-CP DIP switch configuration.

See Figure B-8 on page 172 for the P12×1-RCP DIP switch configuration.
Figure B-6 summarizes the features of the P12×1-CP router control panel.
Configuration capabilities of the Panacea Lite local and remote control panels are
as follows:

Assign Sources — Assigns Sources consecutively from Source 1

Breakaway Operation — Allows you to change a source on a selected Level
without affecting sources already connected on other Levels (see
page 175 )
Figure B-6 Control Panel Operational Summary