Imagine Panacea Lite, Руководство по эксплуатации

Страница: 123 / 205

Chapter 4
P12×1-SP Installation, Configuration, and Operation
104
Copyright © 2004-2007, 2008, 2010, Harris Corporation
The P12×1-SP sends status command to the X-Y in these conditions:
1 Power Up
When the P12×1-SP is first powered up, it will send the complete status of all
device functions to the X-Y port.
2 Status Change
The P12×1-SP is updating the device’s status every 1/10 second. When a
function changes its status, it sends the status change command only with the
ID for functions which have been changed.
For example, if PLAY has been changed from one to zero and STOP changed
from zero to one, the following commands are sent:
K!<Device ID>,Z:04
K!<Device ID>,O:09
3 A Request of Status Update is Received
When the X-Y port receives the Status Update command, a complete status of
the device is sent to the X-Y port.
The Status Update command is as follows:
K:<Device ID>,S9
17..... CF Mode 35..... Svo Alarm
18..... Freeze On 36..... CF Lock
19..... Auto Mode 37..... EOT
1A..... Preroll 38..... Near EOT
1B..... Preview 39..... Lost Lock
1C..... Auto Edit 3A..... Buzzer
1D..... Review 3B..... Fnc Abort
1E..... Edit 3C..... Mark On
Table 4-21 Status Update Report Functions (Continued)
Function Description Function Description