Imagine Panacea Lite, Руководство по эксплуатации

Страница: 61 / 205

Chapter 4
P12×1-SP Installation, Configuration, and Operation
42
Copyright © 2004-2007, 2008, 2010, Harris Corporation
Additional
Serial Ports
for Harris
Routers:
LSERIAL
Use the LSERIAL configuration to activate the serial port on the Panacea Lite frame.
In this application, the P12×1-SP will translate from RS-232/RS-422 to X-Y.
NOTE : See the Routing Switcher Serial Protocol Reference Operation
and Reference Manual for more information about Harris ASCII and
pass-through protocols.
The LSERIAL supports all functionality of Harris ASCII and pass-through protocols.
The features supported are listed in
Table 4-4 and Table 4-5 on page 43.
Table 4-4 Harris ASCII Protocol Commands
Feature Description
Destination Takes/switches the current source to
the requested destination on the
current level
Information Shows the current system status and
settings
Level Changes the current level (levels 0
through 7 only)
Poll Returns a list of destinations currently
switched to the requested source on
the current level
Query Shows a list of available commands
Read Returns the status of all destinations on
all levels
Source Changes the current source
Terminal [On|Off] Sets or clears Echo mode
Take Switches the requested source to the
requested destination on the level(s)
requested
Reset Resets the P12×1-SP module only (if
you wish to reset the router, the
command is @ z)
@ ? Allows you to enter pass-through
protocol mode
@ ! Allows you to exit pass-through
protocol mode
@ * Resets the current level and source
values, and resends information to the
terminal