Imagine Panacea Lite, Руководство по эксплуатации

Страница: 124 / 205

Panacea Lite Routing Switcher Series
Installation, Configuration, and Operation Manual
105
Copyright © 2004-2007, 2008, 2010, Harris Corporation
Error Messages
There are certain situations in which the device will not operate properly. The
P12×1-SP generates an error message to the X-Y port as follows:
K!<Device ID>,E:<Error Code>
Table 4-22 shows descriptions of the error codes.
An error message is sent to X-Y port when

The error is first detected.

There is a machine control request from the X- port.
When the error condition is gone, or fixed, the P12×1-SP will sent the complete
status to the X-Y port.
RS-232/RS-422
Jumper Orienta-
tion
Figure 4-43 shows the proper orientation for the RS-232 and RS-422 jumper. (See
Figure 4-6 on page 34 for an illustration of the pin 1 reference point location.)
Figure 4-53 LXYTOXPRS RS-232/RS-422 Jumper Orientation
DIP Switch Set-
tings
Figure 4-54 on page 106 shows the proper DIP switch settings for this
configuration. Factory default items are marked with an asterisk (*).
Table 4-22 Error Codes and Descriptions
Error Code Description
00..... Device power off or no response from
the device
Other numbers representation These are the error data bits being
received from the device and will
directly put into the <Error Code> field
for the technician to debug.