Imagine Panacea Lite, Руководство по эксплуатации

Страница: 34 / 205

Panacea Lite Routing Switcher Series
Installation, Configuration, and Operation Manual
15
Copyright © 2004-2007, 2008, 2010, Harris Corporation
All Harris protocols currently use 8 data bits, no parity, and 1 stop bit.
X-Y Port
The X-Y control bus is a high speed serial interface by which Harris routers and
control panels are interconnected. The X-Y control bus links multiple routers and
control panels in a bus topology.
The X-Y coaxial control port allows control panels and router frames to be
interconnected using standard 75

video coax cable. The ends of the X-Y bus
must be terminated using standard 75

video terminators. The unused looping
X-Y port must be terminated.
Back Panel I/O
Modules
Analog Audio Back Panel I/O Connectors
The analog audio back panel uses two D-type 62-pin connectors. These connectors
are positioned as shown in
Figure 2-5 .
Figure 2-5 Analog Audio Back Panel Connectors
AES Audio Back Panel Balanced I/O Connectors
The balanced AES audio back panel uses 2 D-type 62-pin connectors for AES
inputs/outputs. These connectors are positioned as shown in
Figure 2-6 .
Figure 2-6 Balanced AES Audio Back Panel I/O Connectors
AES Audio Back Panel Coax I/O Connectors
The coax AES audio back panel uses 12 BNC connectors for inputs and 2 for
outputs for each of the 2 AES channels. These connectors are positioned as shown
in
Figure 2-7 .
Figure 2-7 Coax AES Audio Back Panel I/O Connectors
Analog Video Back Panel I/O Connectors
The analog video back panel uses 12 BNC connectors for inputs and 2 for outputs.
These connectors are positioned as shown in
Figure 2-8 .
You can use the analog video looping input submodule (P12×1-VL) with this
product.