Imagine Panacea Lite, Руководство по эксплуатации

Страница: 150 / 205

Panacea Lite Routing Switcher Series
Installation, Configuration, and Operation Manual
131
Copyright © 2004-2007, 2008, 2010, Harris Corporation

Video Level = 4
Audio Level = 5
Level Control determines which levels will be affected by this submodule.

The first, or lowest, consecutive level set on the DIP switch is assigned to
the video level.

The next consecutive level set on the DIP switch, plus all other levels set in
consecutive order, are assigned and follow the audio level.
In this example, poles 1 and 4 are ON; so the first, or video, level is assigned to
Level 4. The next, or audio, level is assigned to Level 5.

Destination Offset = 8
Destination Offset offset the destinations from 0 to 64 using binary code.
Figure 4-71 Panacea Lite DIP Switch Settings Example
GVG TEN-XL
ASCII Protocol
This module processes two GVG TEN-XL ASCII protocol controller commands:
Crosspoint Write and Status Read. (See
Table 4-26 for command definitions.) The
ASCII interface mode is enabled by setting the submodule DIP switches as shown
in
Figure 4-75 on page 137.

Crosspoint Write
1

Status Read
1
(request)
From controller [STX][AH][AL][VXPT][AXPT]
From switcher [VXPT][AXPT][PS]
1
All codes are adjacent to each other, and no spaces are allowed.
From controller [STX][AH][AL][ENQ]
From switcher [VXPT][AXPT][PS]