SmartPLC DataLine with EtherNet/IP device interface
30
>
Numerical field
41720
The numerical field allows the operator to enter integer values. The value range is context-specific.
Numerical fields are part of the following GUI elements:
Control element
Example
Meaning
IP address
Entry of an IP address (IPv4) in [w.x.y.z] format
w | x | y | z = network segments (value range: 0... 255)
Date
Date entry in [yyyy-mm-ss] format
yyyy = year (value range: 0000 ... 9999)
mm = month (value range: 01 ... 12)
dd = day (value range: 01 ... 31)
Time
Time entry in [hh:mm:ss] format
hh = hours (value range: 00 ... 12)
mm = minutes (value range: 00 .... 59)
ss = seconds (value range: 00 ... 59)
The numerical field for seconds (ss) cannot be
edited!
Analogue value
Entry of an analogue output value
Value range (per numerical field): 0 ... 9
Use (using the example of the numerical date field):
1 Select a numerical field
►
Use [
] / [
] arrow key to select the date control element.
>
The focus (= orange frame) is on the selected date control element.
>
The date control element displays the current date
2 Activate the editing mode
►
Press [Select] function key to enter the editing mode.
>
The focus (orange frame) is on the right element
3 Set the desired value
►
Use [
] / [
] arrow key to increment the desired value.
>
The segment displays the new value.
Press and hold the arrow key [
] / [
] to rapidly move through larger value ranges.
4 Select the next segment
►
Use the arrow key [
] / [
] to mark the segment to be edited.
>
The focus (orange frame) moves to the marked segment
►
Optional: Repeat steps 3 and 4 until all segments have the desired values.
