IFM SmartPLC DataLine AC1423, Руководство по эксплуатации устройства

Страница: 10 / 200

SmartPLC DataLine with EtherNet/IP device interface
10
>
3.1 Intended use
Content
Permitted use .........................................................................................................................................10
Prohibited use .........................................................................................................................................10
36928
>
3.1.1 Permitted use
36762
The device is designed for operation in the control cabinet.
The device may only be used for the following purposes:

as AS-i master in 1 or 2 AS-i networks to control the data exchange to the sensor/actuator level

as gateway between the AS-i network and a higher-level controller (EtherNet/IP-Controller = Host;
e.g. PLC) via the fieldbus interface

as Programmable Logic Controller (PLC) for program-based parameter setting, control and
regulation of the AS-i slaves connected to the device

as EtherCAT master (software extension)

as fieldbus slave (software extension)
>
3.1.2 Prohibited use
34228
The device may not be used beyond the limits of the technical data (
→
Technical data
(
→ S.
119 ))!