IFM SmartPLC DataLine AC1423, Руководство по эксплуатации устройства

Страница: 57 / 200

SmartPLC DataLine with EtherNet/IP device interface
57
>
Change the analogue output values manually
41598
To change the analogue output values of an AS-i slave manually:
1 Enable manual access to the outputs
►
Set [Output access] parameter = Manual (→ Set the output access (→ S. 68 )).
2 Select the menu page
►
> or >
► Select an AS-i slave (→ Slave selector (→ S. 24 )).
► Select [Data] tab.
3 Set the analogue output values manually
> [Outputs] group shows the current value of the analogue output.
► Change the value of the requested channel one digit at a time (→ Numerical field (→ S. 30 )).
> Selected value is applied.
►
Optional: repeat step 3 to change further channels.
>
Show AS-i slave information
41643
To display information about an AS-i slave:
1 Select the menu page
► > or >
► Select an AS-i slave (→ Slave selector (→ S. 24 )).
►
Select [Information] tab.
2 Display information about the AS-i slave
> Page shows the following information:
Name Description Possible values
[AS-i slave addess] Current address of the AS-i slave e.g. 13B
[Slave status] Current status of the AS-i slave AS-i slave is active
AS-i slave is missing
Not projected
Double address error
Periphery fault
[AS-i slave profile] Current (= Current) and expected
(= Preset) slave profile (IO, ID, ID2,
ID1) in hexadecimal format
► Use [  ] / [  ] for page navigation.