IFM SmartPLC DataLine AC1423, Руководство по эксплуатации устройства

Страница: 95 / 200

SmartPLC DataLine with EtherNet/IP device interface
95
Parameter Description Possible values
[EtherNet/IP: Slot 9] Analogue inputs, area 1
→
Slot 9 – Analogue input data
(
→ S.
168 )
[EtherNet/IP: Slot 10] Analogue inputs, area 2
→ Slot 10 – Analogue input data
(
→ S.
169 )
[EtherNet/IP: Slot 11] Analogue outputs, area 1
→ Slot 11 – Analogue output data
(
→ S.
170 )
[EtherNet/IP: Slot 12] Analogue outputs, area 2
→ Slot 12 – Analogue output data
(
→ S.
171 )
What data is transmitted in each word depends on the set values of the parameters [Analog. channels/I-Slave] and
[Analog. channels/O-Slave].
→ Set the device-specific parameters (→ S. 92 )
4 Configure the EtherNet/IP slot for diagnostic data
►
Set the following parameters as required:
Parameter Description Possible values
[EtherNet/IP: Slot 13] Diagnostic data transmitted to the
fieldbus controller
→ Slot 13 – Diagnostic data
(
→ S.
176 )
5 Set the EtherNet/IP slots for the data between the EtherNet/IP controller and the device-internal PLC
► Set the following parameters as required:
Parameter Description Possible values
[EtherNet/IP: Slot 14] Scope of data transferred from the
device-internal PLC to the
EtherNet/IP controller.
→ Slot 14 – Inputs from PLC
(
→ S.
183 )
[EtherNet/IP: Slot 15] Scope of data transferred from the
EtherNet/IP controller to the
device-internal PLC.
→ Slot 15 – Outputs to PLC
(
→ S.
184 )
6 Save the changes
► Press [Accept] button.
> Selected values are applied.