IFM SmartPLC DataLine AC1423, Руководство по эксплуатации устройства

Страница: 24 / 200

SmartPLC DataLine with EtherNet/IP device interface
24
>
Slave selector
Content
Overview of slave states .........................................................................................................................25
Overview of free slave addresses ..........................................................................................................27
41653
The slave selector is used to select an AS-i slave or an AS-i address.
Legend:
Indicator of AS-i master operating mode
AS-i address symbol
Highlighted AS-i address (focus)
Status message of highlighted AS-i address
>
The status LED indicates the active operating mode of the AS-i master:
= AS-i master in protected mode
= AS-i master in projection mode
>
Every field represents an AS-i address . An AS-i address can be occupied by:
– a single slave symbol
– an A/B slave pair symbol
>
The row and column headers help to locate the AS-i address.
Example: address of the field selected in the picture
– row header:
1x (= tens digit of the AS-i address)
– column header:
8 (= units digit of the AS-i address)
– type of slave: single slave (= symbol fully occupies the address field)
– resulting AS-i address:
18
>
The symbol of the A/B slave pair appears when an A or B slave is used on this address.
The slave selector is used in the following overviews:

Overview of slave states (
→ Overview of slave states
(
→ S.
25 ))

Overview of free slave addresses (
→ Overview of free slave addresses
(
→ S.
27 ))