IFM SmartPLC DataLine AC1423, Руководство по эксплуатации устройства

Страница: 107 / 200

SmartPLC DataLine with EtherNet/IP device interface
107
>
6.3.2 Firmware update from SD card
41511
Pay attention to notes on memory behaviour (
→
Behaviour of the settings upon firmware update
(
→ S.
106 ))!
>
1 Preparations
►
Download the new firmware file from the ifm website.
► Copy the firmware file into the root directory of an SD card.
► Insert the SD card containing the firmware file in the SD card slot (→ SD card slot (→ S. 13 )).
>
2 Start the recovery mode
►
Separate the device from the circuit.
►
Perform the following actions simultaneously:
 Press the left function key and the arrow keys [  ] and [  ]
simultaneously and keep them pressed (→ picture).
 Connect the device to a circuit.
► Keep the keys pressed until the screen [ifm Recovery] appears
(approx. 10 s).
>
3 Update the firmware
► Use the arrow keys [  ] / [  ] to select the menu item [Install from
SD] (→ picture).
► Press [OK] using the left function key.
> The updating process starts.
> The display shows the progress of the firmware update.
> A status message appears once the firmware has been updated
successfully.
>
4 Reboot the device
►
Use the arrow keys [  ] / [  ] to select the [Reboot] button.
► Press [OK] to reboot the device.
> The device reboots with the current firmware.
> The start screen "Basic settings" appears (→ Start screen 'Basic settings' (→ S. 104 )).