Page
73
of
116
©HALE PRODUCTS, INC. Our policy is one of continuous development. We therefore
reserve the right to amend specifications without notice or obligation.
CONFIGURATION
PRESET CONFIGURATION (STANDARD)
The SmartCAFS Controller allows up to 10 presets to be configured. These presets can be set
for foam only or foam and air (CAFS).
Enter the password
1023
in the system menu’s keyboard to open the preset configuration menu.
Select the preset to configure and that preset’s configuration screen will be shown.
Select color:
- select the color for the preset’s bar (green, red, orange, purple, blue,
disabled). If “disabled” is selected then the preset is turned OFF.
Select icon:
- select the icon to use for this preset.
Select text:
- pops-up a keyboard so that text can be set for this preset (9 characters
per line, up to 3 lines).
CAFS enabled/disabled
- select whether this preset will be using CAFS or foam only.
Foam Tank:
- select which foam tank is used with this preset. If the foam selector is
not set for the correct tank the SmartCAFS Controller will pop-up a
warning to inform the operator to switch to the correct tank.
Select foam %:
- set the foam concentrate percentage required for this preset (this option
is only visible if CAFS is enabled for this preset).
Select ARC position: - set the consistency of the CAFS by setting the Air Ratio Control valve
between WET and DRY (this option is only visible if CAFS is enabled for
this preset).
“Save” button
- save this preset to memory.
“Return” button
- return to the “select a preset” configuration menu.
Save
Return
Содержание HALE SmartCAFS
Страница 106: ......