Page
58
of
116
©HALE PRODUCTS, INC. Our policy is one of continuous development. We therefore
reserve the right to amend specifications without notice or obligation.
The bottom left corner of the screen will now show “manual” because the settings have been
changed from the original preset values.
The foam and/or CAFS power buttons can be pressed to enable/disable the foam/CAF Systems.
•
When foam and CAFS are ON, pressing the foam power button will turn OFF foam and
CAFS.
•
When foam and CAFS are ON, pressing the CAFS power button turns OFF only CAFS.
•
When foam and CAFS are OFF, pressing the foam power button will turn ON only foam.
•
When foam and CAFS are OFF, pressing the CAFS power button turns ON foam and
CAFS.
DISENGAGING THE COMPRESSOR CLUTCH
1. The compressor clutch will be automatically disengaged when the pump engaged signal is turned
OFF. At this time the SmartCAFS Controller will turn OFF foam and CAFS and return to the
preset screen.
2. The compressor clutch can be manually disengaged by pressing and holding the CAFS power
button for three seconds (the warning banner will pop-up to indicate how long the CAFS power
button must be held).
The on-screen CAFS buttons will be gray to indicate that the compressor clutch is disengaged.
Foam %
increase
decrease
buttons
CAFS wet
dry buttons
Manual is
active
CAFS
power
button
Содержание HALE SmartCAFS
Страница 106: ......