Idex HALE SmartCAFS Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 116

Idex HALE SmartCAFS Скачать руководство пользователя страница 63

Page

63

of

116

©HALE PRODUCTS, INC. Our policy is one of continuous development. We therefore

reserve the right to amend specifications without notice or obligation.

MENUS

SYSTEM MENU

Press and hold the MENU button for 3 seconds until the system menu is shown. The system
menu allows the clearing (zero) of the total water and total foam display, setting the simulated
water flow (for diagnostics), and entering passwords for other menus (user and OEM), for
calibrations (water and foam), and for configuration (presets).

NOTE:

The password keyboard is greyed out if the foam and/or CAFS power buttons are ON.

SETTING THE SYSTEM TIME

Press the blue bar in the bottom left corner of the system menu screen (over the month and day)
and the “set the date and time” screen will appear. Enter the new date/time and press the
“green check mark” to save.

NOTE:

The display will re-boot after pressing the “green check mark”.

Touch here

to set the

time

Do not

update

date and

time

(cancel)

Update

date and

time (save)

«
...
61
62
63
64
65
...
»

Содержание HALE SmartCAFS





















































































































Отзывы:

Нет отзывов