Idex HALE SmartCAFS Скачать руководство пользователя страница 49

Страница: 49 / 116

Page

116

©HALE PRODUCTS, INC. Our policy is one of continuous development. We therefore

reserve the right to amend specifications without notice or obligation.

OPTIONAL MULTI-DISPLAY SETUP/OPERATION

This is the setup and operation guide for the multi-display functionality of the SmartCAFS system. The

multi-display feature is designed to work with up to 13 displays that can be placed around the truck to

control the CAFS/Foam unit remotely. At any given time, only one display can be used to control the

system.

IMPORTANT

ALL OEM SETTINGS NOT MENTIONED HERE MUST BE SET THE SAME ON ALL DISPLAYS.

THE FOLLOWING SETUP PROCEDURE MUST BE PERFORMED ON EVERY DISPLAY.

(a)

Setup

1. Access the OEM Configuration menu by entering password 2314 into the password keypad on

the menu screen.

2. Scroll down to the second page of the OEM menu. Input the number of displays that the system

will be using.

3. If you would like this display to be the default master display, set the MASTER box to YES.

There

can only be one master display

. All of the other displays in the system must have a value of NO

in this box.

Note

: Every time the system is restarted, the display that was selected as the default master will

always have control first.

4. Each display must have a number between 1 and the number of displays in the system.

No two

displays can have the same Display Number.

The order in which the displays are numbered

does not matter.

# of displays

Set Master

display

Содержание HALE SmartCAFS





















































































































Результаты поиска

Содержание HALE SmartCAFS

Отзывы:

Idex HALE SmartCAFS, Инструкция по установке и эксплуатации, Страница: 49 / 116

Результаты поиска

Содержание HALE SmartCAFS

Отзывы: