ICP DAS USA DL-301 страница 57 Скачать руководство пользователя

Страница: 57 / 124

DL-300 Data Logger User Manual Version 1.1.0 Aug. 2015

- 53 -

Host Watchdog

Host Watchdog is used to monitor the RS-485 communication status; if the host

(PC) does not send command “~**” in the time period of WDT Timeout setting, the

enabled Host Watchdog will announce the timeout error and turn the relay output

to Safe value to avoid an unsafe act. Users can not control the relay until the

command “~AA1” is sent to clear the WDT timeout status.

On this tab:

1. Set the time period for WDT timeout, check the checkbox next to Enable WDT

and click the Set WDT button to enable the Host watchdog.

2. Check the checkbox next to Send Host OK to send the “~**” command.

3. Uncheck the checkbox next to Send Host OK to stop sending ~** command, the

Host watchdog timeout will occur and relay will turn to Safe value.

4. Click the Reset WDT button to clear the Host watchdog timeout status.

5. Uncheck the checkbox next to Enable WDT and click the Set WDT button to

disable the Host watchdog.

Note

The relay will not turn to Safe value when any one of the alarm for CO/CO

concentration, temperature, humidity and dew point is enabled. If any one alarm is

enabled, the relay will be linked to the Alarm status. In case an Alarm occurs, the

relay turns ON, it can be used to turn on the user’s alarm light or beeping alarm or

other device.

Содержание DL-301





























































































































Результаты поиска

Содержание DL-301

Отзывы:

Похожие инструкции для DL-301

Бренды по названию

Популярные бренды

ICP DAS USA DL-301, Руководство пользователя

Результаты поиска

Содержание DL-301

Отзывы:

Похожие инструкции для DL-301

Бренды по названию

Популярные бренды