@9
MODE SWITCHES
Push to select your desired operating mode. (p. 43)
• The built-in speech synthesizer announces the selected
mode when the “SPEECH [MODE] SW” item is set to
“ON” in the Set mode. (p. 164)
[SSB]
(p. 47)
➥
Push to alternately select the USB or LSB modes.
• “USB” or “LSB” appears.
➥
In
the
SSB mode, hold down for 1 second to se-
lect
the
SSB data mode (USB-D, LSB-D).
• “
D
” appears in addition to “USB” or “LSB.”
➥
In the SSB data mode, push to return to the normal
SSB mode.
[CW/RTTY] (pp. 48, 56)
➥
Push to alternately select the CW or RTTY
modes.
• “CW” or “RTTY” appears.
➥
Hold down for 1 second to switch between
the
CW and CW-R
(CW reverse)
modes, in
the
CW
mode.
• “CW-R” appears when the CW reverse mode is
selected.
➥
Hold down for 1 second to switch between the
RTTY and RTTY-R (RTTY reverse) modes in
the RTTY mode.
• “RTTY-R” appears when the RTTY reverse mode is
selected.
[AM/FM] (p. 61)
➥
Push to alternately select the AM or FM modes.
• “AM” or “FM” appears.
➥
Hold down for 1 second to select the AM or FM
data mode (AM-D/FM-D).
• “
D
” appears in addition to “AM” or “FM.”
➥
In the data mode, push to return to the normal
AM or FM mode.
NOTE:
• In the AM mode, you can transmit on only the
HF/50MHz frequency bands.
• The AM mode cannot be selected on the 1200
MHz frequency band.
[DV•DR]
(p. 85)
➥
Push to select the DV mode.
• “DV” appears.
➥
Hold down for 1 second to select the DR mode.
• “
” appears.
➥
In the DR mode, push to cancel it.
• “
” disappears.
#0
FILTER SWITCH [FILTER] (p. 73)
➥
Push to select one of three IF filter settings ( / /
).
• The selected filter passband width and shifting value
are displayed for 2 seconds on the LCD display.
➥
Hold down for 1 second to display the “FIL”
screen (Filter) to set the filter passband width.
➥
When the “FIL” screen is displayed, hold down for
1 second to return to the previous screen display.
#1
TRANSMIT FREQUENCY CHECK SWITCH [XFC]
➥
During split frequency or repeater operation, hold
down to listen to the transmit frequency. (p. 82)
• While holding down this switch, the transmit fre
-
quency can be changed with the main dial, keypad
or memo pad.
• When the split lock function is turned ON, push
[XFC] to cancel the dial lock function. (pp. 82, 162)
➥
When the RIT function is turned ON, hold
down to listen to the receive frequency. (RIT is
temporarily cancelled.) (p. 69)
➥
When the
∂
TX function is turned ON, hold down
to listen to the transmit frequency (including
∂
TX
frequency offset). (p. 81)
➥
In the simplex operation, hold down to listen to
the receive frequency.
• The squelch is closed and the interference reject
function is temporary OFF while holding down this
switch.
➥
In the DV mode, the RX monitoring mode is se-
lected by holding down this switch. (p. 118)
■
Front panel (continued)
5
1
PANEL DESCRIPTION
@9
#0
#2#3#4 #5 #6 #7
#1
