#2
VFO SELECT SWITCH [A/B]
(pp. 32, 34)
➥
Push to select either VFO A or VFO B.
➥
Hold down for 1 second to equalize the undis-
played VFO settings to that of the displayed VFO.
#3
SPLIT SWITCH [SPLIT] (p. 82)
➥
Push to turn the split function ON or OFF.
• “SPLIT” appears when the split function is ON.
• The split function is not selectable on the SUB
Band.
➥
Hold down for 1 second to activate the quick split
function.
• The transmit frequency shifts from the receive fre
-
quency according to the “SPLIT Offset” option in the
Set mode. (p. 162)
• The quick split function can be turned OFF in
the
“Quick SPLIT” item of the Set mode. (p. 162)
#4
SUB SWITCH [SUB]
➥
Push to turn the SUB Band setting mode ON or
OFF. (p. 33)
• “
” appears when the SUB Band setting mode is
ON.
➥
Hold down for 1 second to turn the SUB Band
display ON or OFF. (p. 32)
#5
MAIN/SUB•BAND SWITCH [MAIN/SUB•BAND]
➥
Push to toggle between the MAIN Band and the
SUB Band. (p. 32)
➥
Hold down for 1 second one or more times to se-
lect HF/50 MHz, 144 MHz, 430 MHz or 1200 MHz
frequency band as your operating band. (p. 35)
• The frequency band, selected in either the MAIN or
SUB Band, cannot be selected on the other Band.
#6
SATELLITE SWITCH [SATELLITE] (p. 153)
➥
Push to enter the satellite mode (receive on
MAIN Band, transmit on SUB Band).
• “
” appears.
• The last operated frequencies (downlink and uplink)
and tracking icon (“
”/“
”) appears.
➥
In the satellite mode, push to return to the previ-
ous screen display.
NOTE:
In the DR mode, pushing [SATELLITE]
cancels DR, and then switches the transceiver to
the satellite mode.
If you want to operate in the DR mode after
exiting the satellite mode, you must hold down
[DV•DR] for 1 second.
➥
Hold down for 1 second to transfer the uplink and
downlink frequencies into the satellite VFO.
• The satellite mode is automatically selected after
transferring.
• “
” appears.
• The last operated tracking icon (“
”/“
”)
appears.
• To toggle the tracking operation between normal and
reverse, push [NOR/REV] (7 3).
➥
In the satellite mode, hold down for 1 second to
return to normal operation using the displayed
frequencies.
#7
BAND KEYS/KEYPAD
BAND KEYS Operation
(pp. 35, 36)
When the HF/50 MHz frequency band is not se-
lected in both the MAIN or SUB Band, you can se-
lect the HF/50 MHz frequency band by just holding
down the band key for 1 second.
(Frequency band: HF/50 MHz)
➥
Push to select the operating band.
• [GENE •] selects the general coverage band.
➥
Pushing the same key two or three times calls
up other stacked frequencies in the frequency
band.
• Icom’s triple band stacking register memorizes three
frequencies in each frequency band.
(Frequency band: 144/430/1200 MHz)
➥
Pushing [GENE •] two or three times calls up
other stacked frequencies in the frequency
band, after selecting the 144 MHz, 430 MHz
or 1200 MHz frequency band by holding down
[BAND](MAIN/SUB) for 1 second.
➥
Hold down for 1 second to switch the operating
band to the HF/50 MHz frequency band.
• [GENE •] selects the general coverage band.
•
Pushing the same key two or three times calls up
other stacked frequencies in the frequency band.
KEYPAD Operation
(p. 37)
After pushing [F-INP ENT], push the keys on the
keypad to enter a frequency. After entering, push
[F-INP ENT] to set the frequency.
• Example: To enter 14.195 MHz;
Push [F-INP ENT] [1] [4] [•] [1] [9] [5] [F-INP ENT].
NOTE:
The frequency band, selected in either
the MAIN or SUB Band, cannot be selected on
the other Band.
While in the satellite mode, the keypad operation is
different than described above. See page 154 for
details.
6
1
PANEL DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
The optional UX-9100 is required for 1200 MHz frequency
band operation.
The optional UT-121 is required for DV mode operation.
