132
9
GPS/GPS-A OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■
GPS Set mode
The following individual settings are selectable in the
GPS Set mode. Set them to suit your GPS operating
needs.
q
Hold down [CALL/GPS] for 1 second to display the
“GPS” screen.
w
Push [SET](F-5) to enter the GPS Set mode.
e
Push [
Y
](F-1) or [
Z
](F-2) to select the desired
item.
r
Rotate [MAIN DIAL] to select the desired option.
• Hold down [F-3] for 1 second to reset to the default set
-
ting, if desired.
t
Push [MENU] to save, and return to the “GPS”
screen.
GPS Receiver Baud
1.
(Default: 4800)
Set the baud rate of the GPS receiver to 4800 bps or
9600 bps.
Position Format
2.
(Default: ddd
°mm.mm’
)
Select either the ddd°mm.mm’ or ddd°mm’ss" format
to display position information.
Units
3.
(Default: feet/mile)
Select either meter or feet/mile format to display the
distance and elevation information.
COMPASS Direction
4.
(Default: North REF)
Select the compass display type.
When the position data is displayed, push [F-1] to se-
lect the compass type.
• North REF : The top of the compass represents
north.
• South REF : The top of the compass represents
south.
UTC Offset
5.
(Default: ±0:00)
Set the time difference between UTC (Universal Time
Coordinated) and the local time to between –14:00
and +14:00 in 00:05 steps.
GPS Indicator
6.
(Default: ON)
Turn the GPS icon (“
”) display function ON or OFF.
• OFF : “
” does not appear.
• ON : “
” appears on the display when a valid po-
sition data is received; blinks when an invalid
data is received.
MY Position
7.
(Default: GPS)
Select either GPS or Manual to enter your current po-
sition.
• GPS : The GPS receiver’s position data is used.
• Manual : Manually entered position data is used.
However, when the GPS receiver is con-
nected to the transceiver, this setting will
automatically switch to “GPS.”
Manual Position
8.
(Default: LAT : 0˚00.00
’N
LON : 0˚00.00
’
E)
Manually enter your latitude and longitude data. The
manually programmed data can be memorised.
This item does not appear when “GPS” is selected in
“My Position.”
q
Push [EDT](F-4) to enter the position data edit
mode.
w
Push [
Y
](F-1) or [
Z
](F-2) to select “LAT” or “LON,”
and rotate [MAIN DIAL] to enter the desired posi-
tion data.
• When “LAT” is selected, enter the latitude data.
• When “LON” is selected, enter the longitude data.
• See page 128 for details.
e
Hold down [WR](F-5) to write the data.
Select the item
Reset to the default
setting
[
∫
]
[MENU]
[F-3]
[MAIN DIAL]
[
√
]
[SET]
[
√
]
[CALL/GPS]
Ù
1
Ú
4 8 0 0
S E T
G P S R e c e i v e r B a u d
Displays the Set mode
item name and number
Displays the option
