Icom i9100 Скачать руководство пользователя

Страница: 159 / 212

150

SCANS

Memory scan

A Memory scan searches for signals through Memory
channels 1 to 99.
Blank (unprogrammed) Memory channels are skipped.

NOTE:

For a Memory scan to start, two or more

Memory channels must be programmed. (p. 140)

Push [VFO/MEMO] to select the memory mode.

Push [MENU] to display the “M2” screen (Menu 2).

Push [SCAN](F-1) to display the “SCAN” screen.

Set [RF/SQL] open or closed.

• The scan performance differs, depending on the squelch

setting when the scan was started. See page 146 for
details.

• If the [RF/SQL] control function is set to “AUTO,” the

squelch is always open in the SSB, CW and RTTY

modes. (pp. 44, 162)

Push [MEM](F-1) to start the Memory scan.

• The MHz and kHz decimal points, and “MEMO SCAN”

blink while scanning.

• If

“Up/Down” is selected as the “MAIN DIAL (SCAN)”

option in the Scan Set mode, rotating [MAIN DIAL]
changes the scanning direction. (p. 147)

Push [MEM](F-1) to cancel the scan.

■

Memory scan (Memory mode)

[SCAN]/[MEM]

[VFO/MEMO]

[MENU]

[RF/SQL]

SCAN

M E M

S W R

TCON

V S C

M 2

M E M

∂

SPAN

S E T

S E L

SCAN

∂

1 0 k

M E M

∂

SPAN

S E T

S E L

SCAN

MEMO SCAN

While Memory scanning

Mode Select scan

Repeatedly scans all Memory channels with the same
operating mode as the displayed mode.

NOTE:

For a Mode Select scan to start, two or more

Memory channels must be programmed, and their
operating mode must be the same as the displayed
mode.

Follow steps

through

as described above.

Hold down [MEM](F-1) for 1 second to turn ON the

Mode Select scan.

• “MODE-S” appears.

Push the mode switch to select the desired operat-

ing mode to be scanned.

Push [MEM](F-1) to start the Mode Select scan.

• The MHz and kHz decimal points, and “MODE-SEL

SCAN” blink while scanning.

• If

“Up/Down” is selected as the “MAIN DIAL (SCAN)”

option in the Scan Set mode, rotating [MAIN DIAL]
changes the scanning direction. (p. 147)

• Memory scan and Mode Select scan can be switched

by holding down [MEM](F-1) for 1 second.

Push [MEM](F-1) to cancel the scan.

While Mode Select scanning

Push

M E M

∂

SPAN

S E T

S E L

SCAN

MODE−SEL SCAN

[SCAN]/[MEM]

[VFO/MEMO]

[MENU]

[RF/SQL]

Mode switches

Содержание i9100





















































































































































































































Результаты поиска

Содержание i9100

Отзывы:

Похожие инструкции для i9100

Бренды по названию

Популярные бренды

Icom i9100, Инструкция по эксплуатации

Результаты поиска

Содержание i9100

Отзывы:

Похожие инструкции для i9100

Бренды по названию

Популярные бренды