Icom i9100, Инструкция по эксплуатации

Страница: 151 / 212

142
10
MEMORY OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
The Memory channel contents (frequency, operating
mode, etc.) can be copied to the VFO.
The copy can be performed in either the VFO mode or
the Memory mode.
D Copying in the VFO mode
This is useful for copying programmed contents to a
displayed VFO.
q
Push [VFO/MEMO] to select the VFO mode.
w
Rotate [M-CH] to select the Memory channel num-
ber to be copied.
• “
” appears if the selected Memory channel is a
blank channel. In this case nothing can be copied.
e
Hold down [VFO/MEMO] for 1 second to copy the
Memory channel contents into the VFO.
• Three beeps sound when the copy is complete.
D Copying in the Memory mode
This is useful for copying the Memory channel con-
tents while operating in the Memory mode.
When you have changed the displayed frequency,
operating mode, etc. in the selected Memory chan-
nel:
• Displayed
data is copied.
• Programmed
contents in the Memory channel are
not copied, but remain only in the Memory chan-
nel.
q
Push [VFO/MEMO] to select the Memory mode.
w
Rotate [M-CH] to select the Memory channel to be
copied.
• “
” appears if the selected Memory channel is a
blank channel. In this case nothing can be copied.
• Set the frequency or operating mode if required.
e
Hold down [VFO/MEMO] for 1 second to copy the
Memory channel contents into the VFO.
• Three beeps sound when the transfer is complete.
r
Push [VFO/MEMO] to select the VFO mode.
[VFO/MEMO]
[M-CH]
A G C D U P C O M P T B W S C P
M 1
A G C D U P C O M P T B W S C P
M 1
Hold down
A G C D U P C O M P T B W S C P
M 1
Push
While in the Memory mode
The Memory channel contents are transferred
A G C D U P C O M P T B W S C P
M 1
Hold down
A G C D U P C O M P T B W S C P
M 1
While in the VFO mode
The Memory channel contents are transferred
■
Memory contents copying