87
7
DV MODE PROGRAMMING
The access/area and link/gateway repeater call signs
must be programmed in “R1” and “R2.”
Other repeater call signs can be stored in the “RP-L”
screen (Repeater list) (p. 88).
q
Push [DV
•
DR] to select the DV mode.
w
Push [MENU] one or more times to display the “M3”
screen (Menu 3).
• In the DR mode, p
ush [MENU] once or twice to select
the “D1” screen.
e
Push [CS](F-1) to display the “CS” screen (Call
Sign).
r
Push [
Z
](F-1) one or more times to display the “R1”
or “R2” screen (Repeater call sign setting).
t
Push [EDT](F-3) to enter the call sign programming
mode.
• A cursor appears and blinks.
y
Rotate [MAIN DIAL] to select the first character to
input.
When inputting numbers, push the appropriate key-
pad key.
• Push [DEL](F-4) to delete the selected character or
number.
• Push [SPC](F-5) to input a space.
u
Push [
Ω
](F-2) to move the cursor backwards, or
push [
≈
](F-3) to move the cursor forwards.
i
Repeat steps
y
and
u
to enter a desired repeater
call sign.
• A call sign of up to 8 digits can be set.
o
Push [MENU] to store the programmed call sign.
!0
Push [MENU] again to return to the “CS” screen.
[CS]/[
√
] [EDT]
[MENU]
[DV
・
DR]
[MAIN DIAL]
CS
C D
R > C S
U R
DSET
M3
C S U
R
CQCQCQ
M
Y
R
1
R
2
NOT USE
Ú
R 1
Ú
≈
R1
C L R
E D T
N A M E
G R P
R1
Ú
R1
Ω
≈
D E L
S P C
■
Call sign programming (Continued)
D
“R1” (
Access/Area repeater call sign
) and “R2” (
Link/Gateway repeater call sign
) programming
