118
8
DV MODE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
■
DV Set mode description
The DV Set mode is used for programming infrequently
changed values or functions in the DV mode.
D
DV
Set mode settings
q
In the DV mode, push [MENU] one or more times to
display the “M3” screen (Menu 3).
• In the DR mode, p
ush [MENU] once or twice to select
the “D1” screen.
w
Push [DSET](F-5) to display the “DSET” screen.
e
Push [SET](F-5) to enter the DV Set mode.
r
Push [
Y
](F-1) or [
Z
](F-2) to select the desired
item.
t
Rotate [MAIN DIAL] to select the desired option.
• Hold down
[F-3] for 1 second to reset to the default set-
ting, if desired.
y
Push [MENU] to save, and return to the “DSET”
screen.
Standby Beep
1.
(Default: ON-1)
Turn the Standby beep function ON or OFF.
This function sounds a beep when the other station
stops transmitting.
• OFF : Turns OFF the function.
• ON-1 : Turns ON the function to sound a beep.
• ON-2 : Turns ON the function to sound a beep.
If the call was sent to your own call sign, the
beep has a higher pitch.
Auto Reply
2.
(Default: OFF)
Turn the automatic reply function ON or OFF.
This function automatically replies to a call addressed
to your own call sign, even if you are away from the
transceiver.
This function is automatically turned OFF after you
push [PTT] (microphone) or [TRANSMIT].
• OFF : Turns OFF the function.
• ON : The transceiver automatically replies to the
call with your own call sign.
DV Data TX
3.
(Default: PTT)
For low-speed data communication, select whether to
transmit the input data manually or automatically.
• PTT : Push [PTT] (microphone) or [TRANSMIT] to
manually transmit the input data.
• Auto : When data is input from a PC through the
[DATA1] jack, the transceiver automatically
transmits it.
Digital Monitor
4.
(Default: Auto)
Select the RX monitoring mode by holding down [XFC]
while in the DV mode.
• Auto :
Monitors in the DV mode or FM mode, de-
pending on the received signal.
• Digital : Monitors in the DV mode.
• Analog : Monitors in the FM mode.
Digital RPT Set
5.
(Default: ON)
Turn the digital repeater setting function ON or OFF.
When accessing a repeater that has a call sign dif-
ferent than the transceiver’s “R1” setting, this function
reads the repeater’s downlink signal and automatically
sets the correct repeater call sign into “R1.”
• OFF : Turns OFF the function.
• ON : Automatically sets the repeater call sign.
RX Call Sign Write
6.
(Default: OFF)
Turn the RX call sign automatic write function ON or
OFF.
When receiving a call addressed to your own call sign,
this function automatically sets the call sign of the call-
ing station into “UR.”
While in the DR mode, this function is disabled.
• OFF : Turns OFF the function.
• Auto : Automatically sets the call sign of the calling
station into “UR.”
∫
1
√
O N – 1
Standby Beep
S E T
Select the item
Reset to the default
setting
Displays the DV Set mode
item name and number
Displays the option
[MAIN DIAL]
[MENU]
[DSET]/[SET]
[
�
] [
�
]
