Icom i9100 Скачать руководство пользователя

Страница: 52 / 212

BASIC OPERATION

■

Operating mode selection

The usable operating modes in the IC-9100 are listed
to the right.

You can select the desired operating mode by push

ing the mode switch.
See the diagram to the right for the order of selection.

You can mute the microphone signals when the

data mode is selected, depending on the “DATA
MOD” option in the Set mode (p. 167).

• Selecting the SSB mode

➥

Push [SSB] to select the USB or LSB mode.

• “LSB” or “USB” appears.
• When operating above 10 MHz, USB is selected first;

when operating below 10 MHz, LSB is selected first.

• Push [SSB] again to toggle between USB and LSB.
• After USB or LSB is selected, hold down [SSB] for

1 second to select the data mode. (“

” appears)

• In the data mode, push [SSB] to return to the normal

SSB mode.

• Selecting the CW/RTTY mode

➥

Push [CW/RTTY] to select the CW or RTTY mode.

• “CW” or “RTTY” appears.
• Push [CW/RTTY] again to toggle between CW and

RTTY.

• After CW or RTTY is selected, hold down [CW/RTTY]

for 1 second to toggle between

normal and reverse

modes.

(“CW-R” or “RTTY-R” appears.)

• Selecting the AM/FM mode

➥

Push [AM/FM] to select the AM or FM mode.

  • “AM” or “FM” appears.
  •  Push [AM/FM] again to toggle between AM and FM.
  •  After  AM  or  FM  is  selected,  hold  down  [AM/FM]  for

1 second to select the data mode. (“

” appears)

• In the data mode, push [AM/FM] to return to

the normal

AM or FM mode.

NOTE:

• In the AM mode, you can transmit on only the

HF/50MHz frequency bands.

• The AM mode cannot be selected on the 1200

MHz frequency band.

• Selecting the DV mode (including DR mode)*

➥

Push [DV•DR] to select the DV mode.

• “DV” appears.
• DV mode (digital voice + low-speed data communica

tion) allows you to exchange the text message and call
sign, and transmit a position data with a third-party GPS
receiver.

➥

Hold down [DV•DR] to turn the DR (D-STAR

Repeater) mode operation ON or OFF.

•

“DV” and “

” appears.

• The DV mode is automatically selected when the DR

mode is ON.

• DR (D-STAR Repeater) mode allows you to use a re

peater list to operate a D-STAR repeater simply.

The optional UT-121 is required for DV mode operation.

Mode switches

USB

LSB

CW-R

RTTY

RTTY-R

: Push momentary

: Hold down for 1 second

• Usable operating modes

Mode switch

Operating mode

[SSB]

USB

USB Data

LSB

LSB Data

[CW/RTTY]

CW Reverse

RTTY

RTTY Reverse

[AM/FM]

AM Data

FM Data

[DV•DR]

INFORMATION!
The DV mode can be selected in either MAIN or SUB
band. If you select the DV mode in both Bands, the
transceiver cannot receive on the SUB Band.

Содержание i9100





















































































































































































































Результаты поиска

Содержание i9100

Отзывы:

Похожие инструкции для i9100

Бренды по названию

Популярные бренды

Icom i9100, Инструкция по эксплуатации

Результаты поиска

Содержание i9100

Отзывы:

Похожие инструкции для i9100

Бренды по названию

Популярные бренды