39
3
BASIC OPERATION
■
Frequency setting (Continued)
D
Selecting 1 Hz step
You can change the frequency in 1 Hz steps for fine
tuning.
q
Push [TS] to turn OFF the Quick Tuning function.
w
Hold down [TS] for 1 second to turn the 1 Hz tuning
step ON or OFF.
NOTE:
• When RIT and/or
∂
TX are used, they also tune in
1 Hz tuning steps.
• The frequency changes in 50 Hz steps when the
[UP]/[DN] switches of the microphone are used
for frequency tuning (if the quick tuning function is
not selected.)
D
Auto tuning step function
When you rotate [MAIN DIAL] rapidly, the tuning speed
can automatically accelerate, depending on the “MAIN
DIAL Auto TS” option in the Set mode.
q
Hold down [MENU] for 1 second to enter the Set
mode.
w
Push [
Y
](F-1) or [
Z
](F-2) to select “MAIN DIAL
Auto TS.”
e
Rotate [MAIN DIAL] to select the HIGH or LOW
tuning speed acceleration, or to turn OFF the func-
tion.
• HIGH : When the tuning step is set to 1 kHz or
smaller steps, the tuning speed is approxi-
mately five times faster.
When the tuning step is set to 5 kHz or
larger steps, the tuning speed is approxi-
mately two times faster.
(default)
• LOW : Approximately two times faster
• OFF : Auto tuning step is turned OFF.
• Hold down [CLR] (F-3) for 1 second to reset to the de
-
fault value.
r
Push [MENU] to save, and exit the Set mode.
D
1
⁄
4
tuning step function
(Mode: SSB-D/CW/RTTY)
The dial speed is reduced to
1
⁄
4
of the normal speed
when the
1
⁄
4
tuning function is ON, for finer tuning con-
trol.
You can set the
1
⁄
4
tuning function in each operating
frequency band.
This function is selectable only when the quick tuning
function is turned OFF.
q
Push [MENU] to display the “M1” screen (menu 1).
w
Push [1⁄4](F-3) to turn the
1
⁄
4
tuning function ON or
OFF.
• “
” appears when the
1
⁄
4
tuning function is ON.
[TS]
[MAIN DIAL]
A G C
D U P
C O M P
T B W
S C P
M 1
1 Hz step indication
[
∫
] [
√
]
[MAIN DIAL]
[MENU]
HIGH (default)
Ù
4 4
Ú
H I G H
S E T
M A I N D I A L A u t o T S
[1⁄4]
[MENU]
A G C
D U P
1 / 4
S C P
M1
Appears
