IBM ThinkPad 760CD Скачать руководство пользователя страница 46

Страница: 46 / 370

Using the Display

The color LCD of your computer supports SVGA mode (800-by-600
video resolution) with up to 65 536 colors.

To attach the external display:

Page 194.

When you attach an external display that supports higher resolution
than VGA mode, you can get a maximum of 1024-by-768 video
resolution.

To change the display mode:

Page 195.

To display computer output on an external display, you need to set
the appropriate

display mode. You can select one of the following

display modes:

LCD only: The computer output is displayed only on the LCD.

CRT only: The computer output is displayed only on the

attached external display.

If no external display is attached to the computer and the display
mode is set to

CRT only, the output is displayed on the LCD.

Both: The computer output is displayed on both the LCD and

the external display.

IBM ThinkPad 760CD User's Guide

Title: C78TFMST CreationDate: 07/11/95 14:33:57

Содержание ThinkPad 760CD



















































































































































































































































































































































































Результаты поиска

Содержание ThinkPad 760CD

Отзывы:

IBM ThinkPad 760CD, Руководство пользователя, Страница: 46 / 370

Результаты поиска

Содержание ThinkPad 760CD

Отзывы: